Carbon Dioxide – CO2

Carbon Dioxide (CO2) is a key ingredient in carbonated beverages that helps determine the taste, aroma and level of carbonation to ensure the highest quality beverages are being served to your customers.

Tri-State Carbonation Service’s Bulk CO2 Systems are a safer, low-pressure alternative to high-pressure compressed gas cylinders.

Bulk CO2

The Bulk CO2 System provides a continuous and reliable supply of quality CO2 and takes the guesswork out of deciding when to refill the tank through automatic deliveries based on usage. Check out our PDF here.

NO MORE!

No more changing tanks during peak business hours;
No more flat beer or flat soda;
No more wasting products and supplies;
No more damage to the business property by rolling out heavy cylinders;
No more injuries to employees by rolling out of cylinder tanks.

What is Bulk CO2?

What are the benefits of using Bulk CO2?

	Bulk CO2	High Pressure Cylinders
Cost	Generally less expensive than high-pressure cylinders since purchasing in bulk.	No buying power since buying low quantities.
Product	Only pay for CO2 consumed. No residual CO2 left at bottom of tank when returned.	Residual CO2 left at bottom of tank when returned that you paid for but will not use.
Time	Time saved by eliminating need to swap cylinders. No need to spend time ordering CO2.	Time wasted by swapping out cylinders. Tank usually needs to be swapped when it's peak time.
Satisfaction	With Bulk CO2, CO2 is always running through the system. No flat drinks when served, which means satisfied customers.	Cylinders are replaced when customers complain drinks are flat. By the time this happens, poor quality product was served, which means UNsatisfied customers.
Less Waste	With the reduction of flat drinks, customers consume the product resulting in less waste of cups, straws, lids and more!	When flat drinks are served, customers do not consume them and that leads to wasted cups, straws, lids and more!
Space	Bulk CO2 tanks only need 24" of space. Leaving valuable space for other products or systems.	High-Pressure Cylinders are large, require a large amount of space and must be chained to the wall. Typically 3-4 tanks are needed at a time.
Safety	Bulk tanks are not portable. Employees do not move them reducing the possibility of injury.	Cylinders are required to be moved when empty. When being moved, this increases the chance of injuiry.
Damage	Bulk tanks are not portable, reducing damage to concrete, doorways, floors, etc.	Cylinders must be replaced when empty, increasing possibility of damage to concrete, doorways, floors, etc.